| After-sales Service: | Factory Warranty |
|---|---|
| Warranty: | 1 Years |
| Customized: | Non-Customized |
| Certification: | CE, ISO |
| IP Rating: | IP65 |
| Screen Size: | 4 Inches |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
|
Screen
|
4-inch true-color TFT LCD
|
|||
|
Accuracy
|
Real time display: ±0.2% F.S. Recall accuracy: ±0.2% F.S. (note: thermocouple should remove cold end error)
|
|||
|
Processor
|
High performance arm Cortex-M3 32 bit RISC core can be used to collect, record, display and alarm multiple signals at the same time
|
|||
|
Memory module
|
Large capacity parallel NAND FLASH flash chips are used to store historical data, and serial FRAM storage chips are used to store key parameters such as configuration parameters
|
|||
|
Input function
|
Input specification: fully isolated universal input, maximum support 16 analog input
|
|||
|
Voltage input: 0-5V, 1-5V, 0-20mV, 0-100mV,0-10V,
|
||||
|
Resistor input: Res (0 ~ 400 Ω)
|
||||
|
Thermal resistance: PT100, Cu50, G53, Cu100, BA1, BA2 (three-wire resistance balance, lead resistance < 10 Ω)
|
||||
|
Thermocouple:S,B,K,T,R,E,N,J
|
||||
|
Radiation pyrometer:F1,F2
|
||||
|
Tungsten rhenium: WRe3-25 WRe5-26
|
||||
|
Current input: 0-10mAn 4-20mAn 0-20mA
|
||||
|
|
Distribution output: up to 1sets of transmitters are supported for isolated distribution 24VDC, each group of distribution ≤ 60mA, support other specifications of isolated distribution (e.g. 12VDC / 5VDC distribution output)
|
|||
|
Transmission output: support up to 6 channels standard current output, load capacity 750 Ω (maximum), convenient display instrument or DCS / PLC acquisition, achieve long distance signal transmission
|
||||
|
Relay alarm output: up to 4 relay alarm output, contact capacity 1A@ 250VAC / 1A@ 30VDC (maximum contact capacity customizable), can be configured upper limit, lower limit alarm.
|
||||
|
printin
|
Communication interface: providing RS232C and RS485 communication interfaces for users to choose from, supporting the use of RS232C and RS485at the same time, supporting the use of RS232C and RS232C at the same time, supporting Modbus RTU protocol, baud rates-
(1200N48009600 / 19200 / 38400/ 57600) |
|||
|
Print interface: RS232C direct connection to micro printer, baud rate 1200
|
||||
|
|
Recording capacity: 128MB
|
|||
|
Recording Intervals: 1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10minutes, 30 minutes, 1 hour
|
||||
|
|
Data backup and storage: support USB 1.1 USB 2.0 USB disk, support 1G to 32GB U disk for data transfer, strong compatibility, compatible with most of the U disk on the market(industrial version recommended)
|
|||
|
Power Supply Voltage
|
Power supply: 100 / 240VAC (rated 220VAC) 50 / 60HZ AC power supply, 24VDC (18VDC-36VDC) DC power supply, 12VDC (9VDC-18VDC) DC power supply (DC power supply to be indicated when ordering)
|
|||
|
|
Power off protection: built-in memory protection parameters and historical data, permanent storage after power off
|
|||
|
Clock protection: integrated hardware clock, can also run accurately after power down
|
||||
|
Working environment [prohibited from working in flammable, corrosive]
|
Working temperature: 0 ºC 50 ºC (avoid direct sunlight)
|
|||
|
Relative humidity: 0 / 85R.H (without condensation)
|
||||
|
Altitude: < 2000m (other than special specifications)
|
||||
|
Instrument net weight
|
Net weight: ≤ 1.5 kg
|
|||
Anhui Jujie Automation Technology Co., Ltd. is a research and development, production, sales in one of the automation
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}