| Customization: | Available |
|---|---|
| After-sales Service: | Factory Warranty |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Production Parameters | |
| Nominal diameter(mm) | Pipe PTFE lining: DN10~DN600 |
| Pipeline rubber lining: DN40~DN2000 | |
| Repeatability error | Measured value ±0.1% |
| Precision level | ±0.5%,+1.0% |
| The temperature of themeasured medium | Conventional rubber lining:-20°C~+600C |
| High-temperature rubber lining:-20ºC~+90ºC | |
| PTFE lining:-20°C~+120°C | |
| High PTFE lining:-20ºC~+180ºC | |
| Rated working pressure (highpressure can be customized) | DN10~DN25 ≤4.0MPa |
| DN32~DN150 ≤1.6MPa | |
| DN200~DN600 ≤1.0MPa | |
| DN700~DN2000 ≤0.6MPa | |
| Velocity range | 0.3~15m/s |
| Conductivity range | ≥5us/cm |
| Signal output | 4~20 mA(0 ~750 Ω load resistance), pulse, control level |
| The communication output | RS485(Modbus-RTU),HART protocol, Profibus protocol |
| Power supply | AC220V; DC24V; DC12V; Battery |
| The length of the straight pipe is required | The length of the straight pipe isrequired |
| Connection mode | Flange connection, Threaded connection, Sanitary clamp connection |
| Protection grade | IP65. lt can be customized lP68 |
Anhui Jujie Automation Technology Co., Ltd. is a research and development, production, sales in one of the automation
FAQ
){kind=link}