| Customization: | Available |
|---|---|
| After-sales Service: | Factory Warranty |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Description | Specifications |
| Measuring Medium | Various gases (Except the acetylene) |
| Pipe Size | DN10~DN4000mm |
| Velocity | 0.1~100 Nm/s |
| Accuracy | ±1~2.5% |
| Working Temperature | Sensor: -40ºC~+220ºC Transmitter: -20ºC~+45ºC |
| Working Pressure | Insertion Sensor: medium pressure≤ 1.6MPa Flanged Sensor: medium pressure≤ 1.6MPa Special pressure please contact us |
| Power Supply | 24VDC or 220VAC |
| Response Time | 1s |
| Output | 4-20mA (optoelectronic isolation, maximum load 500Ω), Pulse, RS485 (optoelectronic isolation) and HART |
| Alarm Output | 2 line Relay, Normally Open state, 3A/30V/DC |
| Sensor Type | Standard Insertion, Sanitary connection, Hot-tapped Insertion, and Flanged connection |
| Sensor Material | 304 Stainless steel (316) |
| Construction | Compact and Remote |
| Pipe Material | Carbon steel, stainless steel, plastic, etc |
| Display | 4 lines LCD Mass flow, Volume flow in standard condition, Flow totalizer, Velocity, etc. |
| Protection Class | IP65 |
| Power Supply | Supply Voltage | 24VDC/1.5A Allow residual ripple:0~100Hz, Upp = 30Mv,Uss<10mV Maximum noise:500Hz~10KHz ,Ueff = 2.0Mv or 85~265V AC |
| Operating current | <650mA | |
| Output | Output current mode | 4~20mA/ Fixed current output |
| RS485 interface | Baud rate:1200/2400/4800/9600/19200 | |
| Data:8 | ||
| Check:None/Odd/Even | ||
| Stop:1 | ||
| RS232 interface | Baud rate:9600 ,Data:8,Check:None , Stop:1 |
|
| Communication protocol | MODBUS RTU |
){kind=link}